What six electrically heated homes taught us about fuel poverty and hot water

November 17, 2026

Fuel Poverty Awareness Day is National Energy Action’s annual day for highlighting the households who can’t afford to keep their homes warm and well. NEA estimates that around 10 million UK households are in fuel poverty, including more than 6 million children, with this year’s focus is on what cold, damp homes do to children’s health.

Hot water energy use is often overlooked as lever to tackle fuel poverty, but its relied on all year round as an essential source for comfort and health.

In a project with National Energy Action and North Devon Homes, six electrically heated homes were fitted with Mixergy smart cylinders to understand the impact that smart hot water can have on a home’s energy bill. The results were striking.

One direct electric home saved £91 on hot water in six months, with roughly half of its hot water was heated by solar power, and the cylinder alone added up to seven EPC points per home.

Why hot water matters in electrically heated homes

In off-gas homes heated by electricity, water heating can use up to 2,000 to 3,000 kWh a year, around a quarter of the household’s electricity, and in some cases that can be more. It’s also the part of the bill families find hardest to cut back on, because washing, cleaning and bathing can’t be paused.

A conventional cylinder heats its whole volume every time, regardless of what they need, so residents pay for hot water they never use. A smart cylinder heats only what a household is likely to need, at the cheapest times, and with a solar diverter it can even store spare solar power as hot water instead of exporting it to the grid.

Our project with North Devon Homes and NEA

North Devon Homes manages more than 3,000 homes, many of them with high running costs and low EPC ratings. We wanted to find out whether smarter hot water could cut residents’ bills, improve energy performance and make better use of the solar panels already on their roofs.

Between September 2023 and May 2024, six homes were fitted with Mixergy Solar X cylinders of 120 to 250 litres, each with a built-in solar diverter. Three homes were heated by direct electric heating and three by air source heat pumps connected to the cylinder through a plate heat exchanger. NEA monitored the homes until the end of 2024 and interviewed the households about living with their new cylinders.

How much did smart hot water save residents?

One direct electric home saved £91 on hot water in six months and a heat pump home saved around £60 over the same period, with roughly half the hot water in the direct electric homes heated by solar power. The full findings are below.

FindingResult
Bill saving, direct electric home£91 on hot water in six months, at 24p/kWh
Bill saving, heat pump homeAround £60 in six months
Solar-heated water, direct electric homes347 to 400 kWh of the 679 to 1,009 kWh used over six months
Solar-heated water, heat pump homes390 to 499 kWh over six months
Solar used on site80.5% of solar output over 12 months in one home with a heat pump and home battery
EPC score, whole project+20 to +46 points per home from solar PV and storage together
EPC score, cylinder alone+2 to +7 points per home, verified using SAP Appendix Q under RdSAP 2012

Residents didn’t change how they used hot water to get these results, though savings will vary with hot water use, tariff, solar generation and heating schedule.

Can a smart cylinder improve a home’s EPC rating?

Yes, the Mixergy cylinder on its own added between two and seven EPC points to each home, verified using SAP Appendix Q under RdSAP 2012. A cylinder alone won’t take a home to EPC C, but it adds to the score alongside fabric and heating measures.

What residents told NEA

Every household NEA interviewed said they had plenty of hot water, and all but one said the new cylinder was better than the one it replaced. That matters as much as the bill savings, because people need to trust a new system before it can save them anything.

Residents using the Mixergy app rated it 4.6 out of 5 for ease of use and 4.8 for usefulness, mostly using it to check how much hot water they had, give it a boost or change the schedule. Those without the app relied on the gauge on the cylinder.

What we learned

The biggest lesson is to start where bills are highest. Electrically heated homes pay the most for every unit of hot water, and where solar panels are already fitted, a diverter turns spare generation into lower bills.

The second is that simple, visible information matters. Plenty of residents never open an app, so the gauge on the cylinder does a lot of the work, and NEA’s interviews have shaped how we set heating schedules, commission cylinders and help residents get the most from them.

The third is that smart hot water fits into programmes housing providers already run. It installs much like a conventional cylinder, works with direct electric heating, heat pumps and solar PV, and leaves a home ready for a heat pump later.

See what it could do for your residents

Every home is different, and our SAP modelling team can show you what smart hot water would save, and what it would add to EPC scores, across your own stock.